<script>on mouseUpvisual shrink to top to graypop cdend mouseUp</script>
</part>
<part>
<id>13</id>
<type>field</type>
<visible> <true /> </visible>
<dontWrap> <false /> </dontWrap>
<dontSearch> <false /> </dontSearch>
<sharedText> <false /> </sharedText>
<fixedLineHeight> <false /> </fixedLineHeight>
<autoTab> <false /> </autoTab>
<lockText> <true /> </lockText>
<rect>
<left>23</left>
<top>231</top>
<right>38</right>
<bottom>246</bottom>
</rect>
<style>transparent</style>
<autoSelect> <false /> </autoSelect>
<showLines> <false /> </showLines>
<wideMargins> <false /> </wideMargins>
<multipleLines> <false /> </multipleLines>
<reservedFamily> 0 </reservedFamily>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>left</textAlign>
<font>Helvetica</font>
<textSize>14</textSize>
<textStyle>bold</textStyle>
<textHeight>18</textHeight>
<name>Register</name>
<script>on mouseUpanswer "Are you and your printer ready to print this card?" with "Yes" or "No"if it is "No" thenplay harpsichord "ee c"elseput "‚àö" into targetsend mouseUp to cd btn "Print"end ifend mouseUp</script>
</part>
<name>Reg Card</name>
<script>on openCardplay "Feed Me!"put empty into cd fld "Register"end openCardon closeCardplay "Thank You"end closeCard</script>
</card>
card_3381.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<script>on mouseDownglobal PopUpListput "Check"&return&"Uncheck" into PopUpListPopUpend mouseDown</script>
</part>
<part>
<id>2</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>98</left>
<top>92</top>
<right>175</right>
<bottom>111</bottom>
</rect>
<style>shadow</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>Birthday</name>
<script>on mouseDownglobal PopUpListput "Birthday"&return&"Christmas" into PopUpListPopUpend mouseDown</script>
</part>
<part>
<id>3</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>129</left>
<top>117</top>
<right>244</right>
<bottom>139</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>Update Fields...</name>
<script>on mouseUpput the short name of btn 1 into whichTypeput the short name of btn 2 into whichCardanswer "Do you really want to"&&whichType&&"all"&&whichCard&&"Card fields in the Phone Book stack?" with "Yes" or "No"if it is "No" thenplay harpsichord "ee c"exit mouseUpend ifif whichType = "Check" thenput "√" into typeOverelse put "" into typeOverif whichCard = "Birthday" thenput "BdayCard" into typeIntoelse put "XmasCard" into typeIntopush cdset lockMessages to truevisual barn door opengo "Phone Book"lock screenrepeat with c = 1 to the number of cdsput whichType&"ing"&&whichCard&&"Card field in card"&&c&&"—> press command-period to stop!"put typeOver into fld typeIntogo next cdend repeatunlock screenhide msgpop cdset lockMessages to falseanswer "All"&&whichCard&&"Card fields have been successfully"&&whichType&"ed!" with "Youza!"end mouseUp</script>
</part>
<part>
<id>4</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>372</left>
<top>92</top>
<right>456</right>
<bottom>111</bottom>
</rect>
<style>shadow</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>left</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>Salutation</name>
<script>on mouseDownglobal PopUpListput "Salutation"&return&"Ext"&return&"Job Title"&return&"Address"&return&"City"&return&"Country" into PopUpListPopUpend mouseDown</script>
</part>
<part>
<id>5</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>364</left>
<top>117</top>
<right>500</right>
<bottom>139</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>Add Pop-up Entry...</name>
<script>on mouseUpput the short name of btn 4 into whichPopask "What item do you want to add to the"&&whichPop&&"menu?"put it into popAddif it = "" thenplay harpsichord "ee c"exit mouseUpend ifput the userlevel into oldLevelset userlevel to 5set cursor to watchlock screenset lockMessages to truevisual barn door closego "Phone Book"if whichPop is in "Salutation,Ext,Job Title" thenput whichPop into PopBtnget script of bg btn PopBtnelse get script of bg PopBggo cd "Configuration Card" of "Phone Book Help"show cd fld tempPopScriptput it into cd fld tempPopScriptfind string "-- Custom"&&whichPopselect after the foundlinetype return&"put return&""e&popAdd"e&&"after PopUpList"put cd fld tempPopScript into tempScriptput "" into cd fld tempPopScripthide cd fld tempPopScriptgo "Phone Book"unlock screenif whichPop is in "Salutation,Ext,Job Title" thenset script of bg btn PopBtn to tempScriptelse set script of bg PopBg to tempScriptgo cd "Configuration Card" of "Phone Book Help"set lockMessages to falseanswer "The"&&whichPop&&"pop-up menu now includes"&"e&popAdd"e&"!" with "Thanks!"set userlevel to oldLevelend mouseUp</script>
</part>
<part>
<id>6</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>12</left>
<top>213</top>
<right>144</right>
<bottom>235</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>Envelope Button...</name>
<script>on mouseUpask "What is the name (exactly) of the Desk Accessory (DA) you want to use with the Envelope Buttons?"put it into EnvDAif it = "" thenplay harpsichord "ee c"exit mouseUpend ifpush cdset lockMessages to truevisual checkerboardgo "Phone Book"put script of bg btn "Work Env" into tempScriptput " doMenu"&"e&EnvDA"e into line 4 of tempScriptset script of bg btn "Work Env" to tempScriptset script of bg btn "Home Env" to tempScriptpop cdset lockMessages to falseanswer "The Envelope Buttons will now use the "&"e&EnvDA"e&&"DA!" with "Wow!"end mouseUp</script>
</part>
<part>
<id>7</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>179</left>
<top>213</top>
<right>334</right>
<bottom>235</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>Replace Area Codes...</name>
<script>on mouseUpask "Replace all Area Codes currently numbered:"put it into oldCodeif it = "" thenplay harpsichord "ee c"exit mouseUpend ifask "With a new Area Code numbered:"put it into newCodeif it = "" thenplay harpsichord "ee c"exit mouseUpend ifanswer "Are you sure that you want to replace ALL Area Code entries of ("&oldCode&") with ("&newCode&")?" with "Yes" or "No"if it is "No" thenplay harpsichord "ee c"exit mouseUpend ifpush cdset lockMessages to truevisual dissolvego "Phone Book"lock screenrepeat with c = 1 to the number of cdsput "Changing Area Codes in card"&&c&&"—> press command-period to stop!"put "("&oldCode&")" into codeReplacerepeat with f = 14 to 23put the short name of fld f into nameTestif "phone" is in nameTest thenput char 1 to 5 of fld nameTest into codeMatchif codeMatch = codeReplace thenselect char 1 to 5 of fld nameTesttype "("&newCode&")"end ifend ifend repeatgo next cdend repeatunlock screenhide msgpop cdset lockMessages to falseanswer "All area codes in"&&c&&"cards have been successfully changed!" with "Really?"end mouseUp</script>
<script>on mouseUppush cdanswer "Do you want to install the Phone Book Button onto your Home Card?" with "Yes" or "No"if it is "No" thenplay harpsichord "ee c"exit mouseUpend ifchoose btn toolselect btn "Phone Book"doMenu "Copy Button"set lockMessages to truevisual iris closego homeput "DON’T CLICK! Move button to position, then click!"put the userlevel into oldLevelset userlevel to 5doMenu "Paste Button"repeat until the mouseClickset the loc of btn "Phone Book" to the mouselocend repeatchoose browse toolhide msgset userlevel to oldLevelpop cdset lockMessages to falseend mouseUp</script>
</part>
<part>
<id>10</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>170</left>
<top>292</top>
<right>209</right>
<bottom>329</bottom>
</rect>
<style>shadow</style>
<showName> <false /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>18020</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>WPIcon</name>
<script>on mouseUpput "18020,18021,18022,18023,18024,18025,18026,18027,18028,18029,18030,1005" into iconNosrepeat with c = 12 down to 1set icon of me to item c of iconNoswait 1 secif the mouseClick = true then exit mouseUpend repeatend mouseUp</script>
</part>
<part>
<id>11</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>241</left>
<top>308</top>
<right>338</right>
<bottom>330</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>Change WP</name>
<script>on mouseUpput the icon of btn "WPIcon" into newIconask "Type in the EXACT name of your Word Processor of choice (e.g., MacWrite II):"put it into WPNameif it = "" thenplay harpsichord "ee c"exit mouseUpend ifpush cdset lockMessages to truevisual shrink to topgo "Phone Book"put script of bg btn "Word 4.00D" into tempScriptput " open"&"e&WPName"e into line 4 of tempScriptset script of bg btn "Word 4.00D" to tempScriptset icon of bg btn "Word 4.00D" to newIconpop cdset lockMessages to falseanswer "The Phone Book stack will now use"&"e&WPName"e&" as your Word Processor!" with "Finally!"end mouseUp</script>
</part>
<part>
<id>12</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>381</left>
<top>301</top>
<right>413</right>
<bottom>331</bottom>
</rect>
<style>transparent</style>
<showName> <false /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>32462</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>Help!</name>
<script>on mouseUpvisual shrink to centergo cd "Phone Book Help!"end mouseUp</script>
</part>
<part>
<id>13</id>
<type>field</type>
<visible> <false /> </visible>
<dontWrap> <false /> </dontWrap>
<dontSearch> <false /> </dontSearch>
<sharedText> <false /> </sharedText>
<fixedLineHeight> <true /> </fixedLineHeight>
<autoTab> <false /> </autoTab>
<lockText> <false /> </lockText>
<rect>
<left>185</left>
<top>259</top>
<right>507</right>
<bottom>336</bottom>
</rect>
<style>scrolling</style>
<autoSelect> <false /> </autoSelect>
<showLines> <false /> </showLines>
<wideMargins> <false /> </wideMargins>
<multipleLines> <false /> </multipleLines>
<reservedFamily> 0 </reservedFamily>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>left</textAlign>
<font>Geneva</font>
<textSize>9</textSize>
<textStyle>plain</textStyle>
<textHeight>12</textHeight>
<name>tempPopScript</name>
<script></script>
</part>
<part>
<id>14</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>460</left>
<top>301</top>
<right>492</right>
<bottom>331</bottom>
</rect>
<style>transparent</style>
<showName> <false /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>14953</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>Return</name>
<script>on mouseUpvisual shrink to bottom slow to graypop cdend mouseUp</script>
</part>
<part>
<id>15</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>372</left>
<top>172</top>
<right>435</right>
<bottom>191</bottom>
</rect>
<style>shadow</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>Mark</name>
<script>on mouseDownglobal PopUpListput "Mark"&return&"Unmark" into PopUpListPopUpend mouseDown</script>
</part>
<part>
<id>16</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>382</left>
<top>213</top>
<right>500</right>
<bottom>235</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>(Un)Mark Now!</name>
<script>on mouseUpput the short name of btn 14 into whichMarkanswer "Do you really want to"&&whichMark&&"all cards in the Phone Book stack?" with "Yes" or "No"if it is "No" thenplay harpsichord "ee c"exit mouseUpend ifpush cdset lockMessages to truevisual iris opengo "Phone Book"if whichMark = "Mark" thenmark all cdselse unmark all cdspop cdset lockMessages to falseanswer "All cards in the Phone Book stack have been successfully"&&whichMark&"ed!" with "Neato!"end mouseUp</script>
</part>
<name>Configuration Card</name>
<script>on openCardplay harpsichord tempo 200 c4e f a c5q a4e c5qend openCard</script>
</card>
card_5001.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<script>on mouseUpplay "I’m Getting Older"wait until the sound is "done"visual dissolve slow to grayhide cd windowcolor black,whitego "Phone Book"show cd windowend mouseUp</script>
</card>
card_2910.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<script>on mouseWithinset hilite of me to truelock screenshow cd fld "Import/ExportTxt"set scroll of cd fld "Import/ExportTxt" to 0unlock screenput "Click inside the scrolling field to close it."put the rect of cd fld "Import/ExportTxt" into TxtLocwait until (item 1 of the mouseloc>item 1 of TxtLoc) and (item 2 of the mouseloc<item 4 of TxtLoc)end mouseWithin</script>
</part>
<part>
<id>56</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>9</left>
<top>320</top>
<right>86</right>
<bottom>334</bottom>
</rect>
<style>transparent</style>
<showName> <false /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <false /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>Help/Configure</name>
<script>on mouseWithinset hilite of me to truelock screenshow cd fld HelpTxtset scroll of cd fld HelpTxt to 0unlock screenplay "Flute" tempo 194 "b3Q3 g a b d4 c c e d d g f# g d b3 g a b c4 d e d c b3 a b g f# g a d f# a c4 b3 a b g a b d4 c c e d d g f# g d b3 g a3 b e d4 c b3 a g d g f# gw"put "Click inside the scrolling field to close it."put the rect of cd fld HelpTxt into TxtLocwait until (item 1 of the mouseloc>item 1 of TxtLoc) and (item 2 of the mouseloc<item 4 of TxtLoc)end mouseWithin</script>
</part>
<part>
<id>57</id>
<type>field</type>
<visible> <false /> </visible>
<dontWrap> <false /> </dontWrap>
<dontSearch> <false /> </dontSearch>
<sharedText> <false /> </sharedText>
<fixedLineHeight> <true /> </fixedLineHeight>
<autoTab> <false /> </autoTab>
<lockText> <true /> </lockText>
<rect>
<left>319</left>
<top>117</top>
<right>509</right>
<bottom>300</bottom>
</rect>
<style>shadow</style>
<autoSelect> <false /> </autoSelect>
<showLines> <false /> </showLines>
<wideMargins> <true /> </wideMargins>
<multipleLines> <false /> </multipleLines>
<reservedFamily> 0 </reservedFamily>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>left</textAlign>
<font>Geneva</font>
<textSize>10</textSize>
<textStyle>plain</textStyle>
<textHeight>13</textHeight>
<name>TextFldTxt</name>
<script></script>
</part>
<part>
<id>58</id>
<type>field</type>
<visible> <false /> </visible>
<dontWrap> <false /> </dontWrap>
<dontSearch> <false /> </dontSearch>
<sharedText> <false /> </sharedText>
<fixedLineHeight> <true /> </fixedLineHeight>
<autoTab> <false /> </autoTab>
<lockText> <true /> </lockText>
<rect>
<left>22</left>
<top>35</top>
<right>158</right>
<bottom>190</bottom>
</rect>
<style>shadow</style>
<autoSelect> <false /> </autoSelect>
<showLines> <false /> </showLines>
<wideMargins> <true /> </wideMargins>
<multipleLines> <false /> </multipleLines>
<reservedFamily> 0 </reservedFamily>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>left</textAlign>
<font>Geneva</font>
<textSize>10</textSize>
<textStyle>plain</textStyle>
<textHeight>13</textHeight>
<name>SalutationTxt</name>
<script></script>
</part>
<part>
<id>59</id>
<type>field</type>
<visible> <false /> </visible>
<dontWrap> <false /> </dontWrap>
<dontSearch> <false /> </dontSearch>
<sharedText> <false /> </sharedText>
<fixedLineHeight> <true /> </fixedLineHeight>
<autoTab> <false /> </autoTab>
<lockText> <true /> </lockText>
<rect>
<left>266</left>
<top>35</top>
<right>403</right>
<bottom>190</bottom>
</rect>
<style>shadow</style>
<autoSelect> <false /> </autoSelect>
<showLines> <false /> </showLines>
<wideMargins> <true /> </wideMargins>
<multipleLines> <false /> </multipleLines>
<reservedFamily> 0 </reservedFamily>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>left</textAlign>
<font>Geneva</font>
<textSize>10</textSize>
<textStyle>plain</textStyle>
<textHeight>13</textHeight>
<name>ExtTxt</name>
<script></script>
</part>
<part>
<id>60</id>
<type>field</type>
<visible> <false /> </visible>
<dontWrap> <false /> </dontWrap>
<dontSearch> <false /> </dontSearch>
<sharedText> <false /> </sharedText>
<fixedLineHeight> <true /> </fixedLineHeight>
<autoTab> <false /> </autoTab>
<lockText> <true /> </lockText>
<rect>
<left>22</left>
<top>70</top>
<right>178</right>
<bottom>213</bottom>
</rect>
<style>shadow</style>
<autoSelect> <false /> </autoSelect>
<showLines> <false /> </showLines>
<wideMargins> <true /> </wideMargins>
<multipleLines> <false /> </multipleLines>
<reservedFamily> 0 </reservedFamily>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>left</textAlign>
<font>Geneva</font>
<textSize>10</textSize>
<textStyle>plain</textStyle>
<textHeight>13</textHeight>
<name>Job TitleTxt</name>
<script></script>
</part>
<part>
<id>61</id>
<type>field</type>
<visible> <false /> </visible>
<dontWrap> <false /> </dontWrap>
<dontSearch> <false /> </dontSearch>
<sharedText> <false /> </sharedText>
<fixedLineHeight> <true /> </fixedLineHeight>
<autoTab> <false /> </autoTab>
<lockText> <true /> </lockText>
<rect>
<left>22</left>
<top>111</top>
<right>162</right>
<bottom>268</bottom>
</rect>
<style>shadow</style>
<autoSelect> <false /> </autoSelect>
<showLines> <false /> </showLines>
<wideMargins> <true /> </wideMargins>
<multipleLines> <false /> </multipleLines>
<reservedFamily> 0 </reservedFamily>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>left</textAlign>
<font>Geneva</font>
<textSize>10</textSize>
<textStyle>plain</textStyle>
<textHeight>13</textHeight>
<name>AddressTxt</name>
<script></script>
</part>
<part>
<id>62</id>
<type>field</type>
<visible> <false /> </visible>
<dontWrap> <false /> </dontWrap>
<dontSearch> <false /> </dontSearch>
<sharedText> <false /> </sharedText>
<fixedLineHeight> <true /> </fixedLineHeight>
<autoTab> <false /> </autoTab>
<lockText> <true /> </lockText>
<rect>
<left>22</left>
<top>144</top>
<right>198</right>
<bottom>285</bottom>
</rect>
<style>shadow</style>
<autoSelect> <false /> </autoSelect>
<showLines> <false /> </showLines>
<wideMargins> <true /> </wideMargins>
<multipleLines> <false /> </multipleLines>
<reservedFamily> 0 </reservedFamily>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>left</textAlign>
<font>Geneva</font>
<textSize>10</textSize>
<textStyle>plain</textStyle>
<textHeight>13</textHeight>
<name>CityTxt</name>
<script></script>
</part>
<part>
<id>63</id>
<type>field</type>
<visible> <false /> </visible>
<dontWrap> <false /> </dontWrap>
<dontSearch> <false /> </dontSearch>
<sharedText> <false /> </sharedText>
<fixedLineHeight> <true /> </fixedLineHeight>
<autoTab> <false /> </autoTab>
<lockText> <true /> </lockText>
<rect>
<left>239</left>
<top>144</top>
<right>401</right>
<bottom>312</bottom>
</rect>
<style>shadow</style>
<autoSelect> <false /> </autoSelect>
<showLines> <false /> </showLines>
<wideMargins> <true /> </wideMargins>
<multipleLines> <false /> </multipleLines>
<reservedFamily> 0 </reservedFamily>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>left</textAlign>
<font>Geneva</font>
<textSize>10</textSize>
<textStyle>plain</textStyle>
<textHeight>13</textHeight>
<name>StateTxt</name>
<script></script>
</part>
<part>
<id>64</id>
<type>field</type>
<visible> <false /> </visible>
<dontWrap> <false /> </dontWrap>
<dontSearch> <false /> </dontSearch>
<sharedText> <false /> </sharedText>
<fixedLineHeight> <true /> </fixedLineHeight>
<autoTab> <false /> </autoTab>
<lockText> <true /> </lockText>
<rect>
<left>174</left>
<top>150</top>
<right>323</right>
<bottom>228</bottom>
</rect>
<style>shadow</style>
<autoSelect> <false /> </autoSelect>
<showLines> <false /> </showLines>
<wideMargins> <true /> </wideMargins>
<multipleLines> <false /> </multipleLines>
<reservedFamily> 0 </reservedFamily>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>left</textAlign>
<font>Geneva</font>
<textSize>10</textSize>
<textStyle>plain</textStyle>
<textHeight>13</textHeight>
<name>StateFldTxt</name>
<script></script>
</part>
<part>
<id>65</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>21</left>
<top>149</top>
<right>67</right>
<bottom>163</bottom>
</rect>
<style>transparent</style>
<showName> <false /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <false /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>Country</name>
<script>on mouseWithinset the rect of cd fld CountryTxt to 22,162,178,292showMeend mouseWithinon mouseLeaverestoreItend mouseLeave</script>
<script>on mouseLeavehide msghide cd fld HelpTxtset hilite of btn "Help/Configure" to falseend mouseLeaveon mouseUphide msghide cd fld HelpTxtset hilite of btn "Help/Configure" to falseend mouseUp</script>
</part>
<part>
<id>96</id>
<type>field</type>
<visible> <false /> </visible>
<dontWrap> <false /> </dontWrap>
<dontSearch> <false /> </dontSearch>
<sharedText> <false /> </sharedText>
<fixedLineHeight> <true /> </fixedLineHeight>
<autoTab> <false /> </autoTab>
<lockText> <true /> </lockText>
<rect>
<left>9</left>
<top>20</top>
<right>493</right>
<bottom>286</bottom>
</rect>
<style>scrolling</style>
<autoSelect> <false /> </autoSelect>
<showLines> <false /> </showLines>
<wideMargins> <true /> </wideMargins>
<multipleLines> <false /> </multipleLines>
<reservedFamily> 0 </reservedFamily>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>left</textAlign>
<font>Geneva</font>
<textSize>10</textSize>
<textStyle>plain</textStyle>
<textHeight>13</textHeight>
<name>Import/ExportTxt</name>
<script>on mouseLeavehide msghide cd fld "Import/ExportTxt"set hilite of btn "Import/Export" to falseend mouseLeaveon mouseUphide msghide cd fld "Import/ExportTxt"set hilite of btn "Import/Export" to falseend mouseUp</script>
</part>
<part>
<id>97</id>
<type>field</type>
<visible> <false /> </visible>
<dontWrap> <false /> </dontWrap>
<dontSearch> <false /> </dontSearch>
<sharedText> <false /> </sharedText>
<fixedLineHeight> <true /> </fixedLineHeight>
<autoTab> <false /> </autoTab>
<lockText> <true /> </lockText>
<rect>
<left>122</left>
<top>40</top>
<right>404</right>
<bottom>253</bottom>
</rect>
<style>shadow</style>
<autoSelect> <false /> </autoSelect>
<showLines> <false /> </showLines>
<wideMargins> <false /> </wideMargins>
<multipleLines> <false /> </multipleLines>
<reservedFamily> 0 </reservedFamily>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<textHeight>16</textHeight>
<name>Welcome</name>
<script></script>
</part>
<part>
<id>99</id>
<type>button</type>
<visible> <false /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>140</left>
<top>212</top>
<right>240</right>
<bottom>234</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>Register Now</name>
<script>on mouseUphide cd fld "Welcome"hide btn "Register Now"hide btn "Forget it, Buster!"visual shrink to center to whitego cd "Reg Card"end mouseUp</script>
</part>
<part>
<id>100</id>
<type>button</type>
<visible> <false /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>255</left>
<top>212</top>
<right>389</right>
<bottom>234</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>Forget it, Buster!</name>
<script>on mouseUphide btn "Forget it, Buster!"hide btn "Register Now"hide cd fld "Welcome"repeat 8 timesset hilite of btn "Help/Configure" to not hilite of btn "Help/Configure"wait 10end repeatend mouseUp</script>
<text>TEXT Entry FieldsThe Phone Book stack requires you to enter each data element in a separate field, which guarantees flexible mail-merge operations. To get from field to field, press either the tab or return key (hold the shift key down to move backwards).You may enter or replace any text in this field.</text>
</content>
<content>
<layer>card</layer>
<id>58</id>
<text>Click on this button to bring up a pop-up menu with some pre-selected titles, such as “Mr.” and “Mrs.” Select one to have it put into the Salutation field and automatically tab into the First Name field. A selection will replace any previous entry.</text>
</content>
<content>
<layer>card</layer>
<id>59</id>
<text>Click on this button to bring up a pop-up menu with some pre-selected name extensions, such as “Jr.” and “Ph.D.” Select one to have it put into the Extension field and automatically tab into the Job Title field. A selection will replace any previous entry.</text>
</content>
<content>
<layer>card</layer>
<id>60</id>
<text>Click on this button to bring up a pop-up menu with some pre-selected Job Titles, such as “Assistant” and “President.” Select one to have it put into the Job Title field and automatically tab into the Company field. A selection will replace any previous entry.</text>
</content>
<content>
<layer>card</layer>
<id>61</id>
<text>Click on this button to bring up a pop-up menu with some pre-selected address components, such as “Boulevard” and “Avenue.” Select one to have it appended to the respective field. Leading and following spaces and commas are inserted automatically for you!</text>
</content>
<content>
<layer>card</layer>
<id>62</id>
<text>Click on this button to bring up a pop-up menu with some pre-selected cities, such as “Oakland” and “New York.” Select one to have your Mac update the City, State, and Country fields, according to your selection, and tab to the Zip field. A selection will replace any previous entry.</text>
</content>
<content>
<layer>card</layer>
<id>63</id>
<text>Click on this button to bring up a pop-up menu of all U.S. States, some U.S. Territories, and all Canadian Provinces. Upon selection, the Mac will automatically enter the appropriate two digit abbreviation into the State field, input the proper Country, and tab into the Zip Code field. A selection will replace any previous entry.</text>
</content>
<content>
<layer>card</layer>
<id>64</id>
<text>All entries in the State Field are automatically converted into uppercase text; e.g., ca->CA. No need to hold down that shift key!</text>
</content>
<content>
<layer>card</layer>
<id>66</id>
<text>Click on this button to bring up a pop-up menu of a few countries such as “Brazil,” “Japan,” “Germany,” and “U.S.A.” Select one to enter it into the Country field and tab into the Zip Code field. A selection will replace any previous entry.</text>
</content>
<content>
<layer>card</layer>
<id>67</id>
<text>Any entry in the Country field spelled EXACTLY as “U.S.A.” will not be entered into the Address Block field.</text>
</content>
<content>
<layer>card</layer>
<id>68</id>
<text>If you are using the nine-digit zip code (zip+4), you needn’t enter the dash “-” between the first five digits and the last four—these fields are smart enough to figure out what you want and will insert the dash between your digits!If you are using an international number that does not conform to this pattern, you will have to enter the dash by yourself. These fields are smart enough not to override your entry as long as at least one dash “-” appears in the number.</text>
</content>
<content>
<layer>card</layer>
<id>69</id>
<text>Click on this button to bring up a pop-up menu of ALL area codes in the United States and Canada. Select one to add or replace any existing area code in the Phone field. This command is smart and will only replace entries beginning with a “(” otherwise, it will insert the area code at the beginning of the number.Hold down the option key before you click this button to find (in Apple’s standard Area Codes stack—which must be available) the area code currently displayed in the Phone field. If there is no area code in the Phone field, then you will be asked for one first.</text>
</content>
<content>
<layer>card</layer>
<id>70</id>
<text>The Phone field will insert dashes “-” at the proper location in your phone number, so all you have to do is enter the number itself!Avoid non-numeric entries in this field, as they may confuse the dialer.Tip: Use one number for the telephone and the other for a facsimile (Fax) number.</text>
</content>
<content>
<layer>card</layer>
<id>71</id>
<text>The “Phone Dialer” button will select the phone number in its respective Phone field, go to Apple’s standard Phone Dialer stack (which must be available for this function to work), dial your number, and return you to the card from which you started. If there is no number in the Phone field, then you will be asked for one to dial.For the call to actually be dialed, your phone receiver must be up against the Mac’s speaker and the volume must be high enough to be interpreted by your phone company—unless, of course, you’ve configured the Phone Dialer stack to use a modem or other direct connect device.If you press the Option key while clicking on the Phone Dialer button, Phone #2 will be dialed.</text>
</content>
<content>
<layer>card</layer>
<id>72</id>
<text>Select any letter and you will be taken to the next card that has a word starting with that letter in the Last Name field. If there is no entry under that letter, the Mac will beep at you.So, if you want to review all cards starting with last names beginning with “N,” just click on “N.”</text>
</content>
<content>
<layer>card</layer>
<id>74</id>
<text>These two fields allow you to develop a mailing list or reminder list. Click on the box next to “B’Day” to put a “√” in the box, which designates that the person is on your Birthday Card list. Likewise, click on the box next to “Xmas” to put the person on your Christmas card list. You can sort on these fields to help you develop a mail-merge or mailing label document (see the Word button).Of course, you may use these fields as you wish, simply remember the meaning you assign to each. (It may help to re-paint the titles.)</text>
</content>
<content>
<layer>card</layer>
<id>75</id>
<text>The Birthday and Anniversary fields are smart enough to insert slashes “/” between the month/day/year. All you have to do is enter the six digits corresponding to xx/xx/xx. If you don’t have the full six digits, e.g., you leave out the leading “0,” you will need to enter the slash in the proper location. Your corrections will not be overriden.</text>
</content>
<content>
<layer>card</layer>
<id>76</id>
<text>The Family field is intended to record information about the person’s spouse and children, but could be used to store any information.If you plan on exporting the Family field to a text file, avoid using carriage returns, as text appearing after a carriage return is transferred over to the next field during the Export process, resulting in misalligned field entries and records that are too long.</text>
</content>
<content>
<layer>card</layer>
<id>77</id>
<text>Click on this button to alternately expand and shrink the size of the Notes field. The AddressBlock field and the Envelope button are hidden whenever the Note is expanded.</text>
</content>
<content>
<layer>card</layer>
<id>78</id>
<text>To return to the PhoneBook stack, click onthis arrow———>>></text>
</content>
<content>
<layer>card</layer>
<id>79</id>
<text>Enter whatever you wish here—its free form set-up permits any entry. Note that a return forces a carriage return, not a tab.If you plan on exporting the Notes field to a text file, try to avoid using carriage returns, as each carriage return forces the program to think that the text following the carriage return actually belongs to the next field, not the Notes field!</text>
</content>
<content>
<layer>card</layer>
<id>81</id>
<text>This field is generated from entries in the other fields—YOU CANNOT TYPE IN THIS FIELD. As soon as you alter and exit a field that feeds into the Address Block, it will automatically update. Clicking on the Address Block or clicking on the Envelope Maker will also update the Address Block.All punctuation and blank fields are processed appropriately and automatically in this field, meaning spaces, returns, and commas are put in the right place for you—no more fixing those addresses! Also, if the Country entry contains “U.S.A.,” it will be ignored.You might be thinking, “but what about the home address?” There’s a nifty solution—press the Option key while clicking in the Address Block, and the block will update with the Home Address. You can then click on the Envelope Maker, Word 4.00B, or Home button to automatically copy the address and take you their respective functions! You want more? Hold the Shift key down (with or without the Option key) to format to European standards: Name, Title, & Company followed by Zip, City, Street, and Country!</text>
</content>
<content>
<layer>card</layer>
<id>82</id>
<text>Click on this button to update the Address block and invoke KiwiEnvelopes! 3.1.5 (if it is installed as a desk accessory). The entry in the Address Block will be automatically pasted into KiwiEnvelopes’ address field. To select the Home Address, hold the Option key down while clicking on this button! Hold the Shift key down to format the address in European style. Note that when selecting the home address, this button changes to the size of a personal envelope as an indicator of a home address, but it doesn’t select a small envelope to print.Use the Configuration Card to modify this button to work with other envelope-making desk accessories like EasyEnvelopes+, INtouch, or TouchBase.KiwiEnvelopes! 3.1.5 is a great product, but I still wish it would provide for custom envelope sizes and a better way to select a larger number of pre-set address (like multi-level, pop-up menus, split by the alphabet).</text>
</content>
<content>
<layer>card</layer>
<id>83</id>
<text>Click on this button to go to the Home stack.Hold down the Option key as you click on the Home button to let you quit immediately to the Finder or Shutdown the Mac!</text>
</content>
<content>
<layer>card</layer>
<id>84</id>
<text>Click on this button to go to Microsoft Word 4.00D. The Phone Book will automatically copy the contents of the Address Block to the Clipboard prior to going to Word so that you can immediately paste the return address in your document and finish typing your letter.Note that your application must be named exactly “Word 4.00D” or this button won’t work. However, you can use the Configuration Card to modify the button’s scripts and ICON to match your word processor of choice. (Note: a number of extra word processing ICONs are included in this stack.)If you hold the option key down when clicking on this button, you can open up ANY application, and the Address Block field will still be copied to the Clipboard.Also included in this distribution are Word templates for performing Print Merges to create a report of your Phone Book stack, as well as mailing labels for both Work addresses and Home addresses. There are even Help files to instruct you on how to use them!</text>
</content>
<content>
<layer>card</layer>
<id>85</id>
<text>UNDER DEVELOPMENT—TELL ME IF YOU WANT THE PHONE & MAIL LOG STACKS COMPLETED AND RELEASED!This button copies the full name showing in the first line of the Address Block, takes you to the Phone Log stack, and tries to find a card with a matching name. If it finds a match, it automatically updates the Company and Phone fields with the corresponding data from the Phone Book stack card (it uses Work Phone #1 for updating purposes).If the Phone Book cannot find a matching name, it automatically creates a new card for you in the Phone Log stack, and pastes in the new data.Hold down the option key to go to the Mail Log stack instead!</text>
</content>
<content>
<layer>card</layer>
<id>86</id>
<text>This button will delete the card currently showing and take you to the next card. This action is permanent, but a dialog asks you to confirm your intentions prior to committing a disastrous error.If you hold down the Option key while clicking on this button, you may delete cards in bulk. You will be asked how many cards to delete first. You can type in any number of cards, but it will not delete beyond the last card in the stack.So, if you want to easily get rid of all the cards through the end of the stack, starting with the current card, type in a number in excess of the number of cards in your stack—the Mac will stop deleting once it reaches the last card!</text>
</content>
<content>
<layer>card</layer>
<id>87</id>
<text>This field shows the card’s number in the stack and the total number of cards in the stack. The Card Number is handy when using the bulk delete function (see the Delete Card button).Click in this field to go directly to a card by number—you will be asked to specify the card number.</text>
</content>
<content>
<layer>card</layer>
<id>88</id>
<text>This button takes you to the last card in the stack (however sorted).If you hold down the option key before clicking on this button, you can move 25 cards ahead!</text>
</content>
<content>
<layer>card</layer>
<id>89</id>
<text>This button takes you to the next card in the stack (however sorted).Hold the option key down and click to move ten cards at a time!Hold the shift key down and click to move to the next marked card!</text>
</content>
<content>
<layer>card</layer>
<id>90</id>
<text>This button creates a new card and puts the cursor in the Salutation field.If you hold down the option key while clicking on this button, a clone of the current card will be created, meaning that all of the text of the current card will be copied to the new card—useful for making multiple, similar entries, such as those from the same company.</text>
</content>
<content>
<layer>card</layer>
<id>91</id>
<text>This button takes you to the previous card in the stack (however sorted).Hold the option key down and click to move ten cards at a time!Hold the shift key down and click to move to the previous marked card!</text>
</content>
<content>
<layer>card</layer>
<id>92</id>
<text>This button takes you to the first card in the stack (however sorted).If you hold down the option key before clicking on this button, you can move back 25 cards!</text>
</content>
<content>
<layer>card</layer>
<id>93</id>
<text>This button will allow you to find any text on any card in the stack. Presss the Return key to repeat the search.To restrict the search to a selected field, hold down the option key prior to clicking on the Find button. First, you will be asked for the text you want to find. Then you will be asked to click on the field to which you want the search confined. You may repeat searches in the same manner as a regular find.</text>
</content>
<content>
<layer>card</layer>
<id>94</id>
<text>This button sorts your cards according to the field you pick. (Now do you see why it is important to split all of your field entries, such as Name, into separate fields?)When you click on the Sort button, you will have the option of sorting all cards or just the marked cards, specifying ascending or descending sorts, as well as sorting by the regular text method, or by the date method (handy for the Birthday and Anniversary fields). The cursor then changes into a pointy finger and asks you to click on the field by which you want to sort. Any fields except Notes, AddressBlock, and Card Number are sortable. (You can modify those parameters, but why???)Once sorting has begun, sit back and relax—the Mac will beep at you when it is finished.</text>
</content>
<content>
<layer>card</layer>
<id>95</id>
<text>WELCOME TO PHONE BOOK HELP!The PHONE BOOK series of stacks attempts to tie together all those loose ends that are common in an office setting. Most notably, it helps you to organize your contacts, addresses, phone numbers, personal notes, phone messages, incoming mail, mail-merge, and assignment tracking.To use the PHONE BOOK, you must use HyperCard version 2.0 or higher. Also, since this stack was intended for use in an office setting, all fields are in the Helvetica typeface, so you should have Helvetica font sizes 9 and 10 installed in your System. Finally, you should use this stack on a hard disk, as certain actions are very slow on floppies, such as calling up the pop-up menus (which may still be slow on unaccelerated SEs and Pluses).Ideas for the PHONE BOOK series came from various sources. For example, the Phone Book stack began life as Kiwi Addresses, from Kiwi Software. If you’re at all familiar with that stack, you’ll see that the Phone Book has been enhanced in NUMEROUS ways!In the Phone Book, you enter your addresses in properly separated fields: first name, last name, company, etc…, so that you can always sort and search by exactly what you want. Further, the individual fields in these records can be exported for sophisticated mail-merge.The PHONE BOOK series of stacks was painstakingly, but rewardingly developed by:Brian A. Foster2417 University AvenueSan Pablo, CA 94806-3684———BrianFos on America Online——Brian Foster on BMUG: (415) 849-2684———Please send all bug reports and enhancement suggestions to this address.I intentionally left the Phone Book stack unprotected, since I expect you to modify it to meet your own needs. (Do so at your own risk!) You will probably want to add your own cities and job positions to the pop-up menus. Pop-up menu entries are either in the button scripts, or in the background script, depending on the menu. For novices, you may add menu items through the Configuration Card, in this stack.If you benefit from the use of this stack, such as in saved time, effort, anguish, and/or sweat, please recognize your savings with a contribution of $15 (or whatever you believe appropriate) sent to me at the address listed above—Thanks!DEDICATION AND THANKSThis PHONE BOOK stack is dedicated to Mr. William T. Hart, an Apple employee whose integrity, kindness, and caring are an inspiration to us all. I hope that Apple will allow Bill to continue his good work.Contributing ideas to the PHONE BOOK’s development (unwittingly??) are:Kiwi Software, Inc.6546 Pardall RoadSanta Barbara, CA 93117-4842(Kiwi Addresses/Contacts!, especially the compiled Address Block)Guy PicciottoCompuServe: 73300,3637, GEnie: G.Picciotto(HPopupMenu 1.1 XFCN—the slickest freebee out there, though it has trouble with extended characters, apostrophes, and commas.)James Finn595 Hill Street, Apt. 2San Francisco, CA 94114(415) 826-5169(Import and Export script ideas—thank you very much for this lifesaver!)Steve Maller, Apple Computer.AppleLink: maller1, Delphi: stevemaller, MCI Mail: smaller(FileName XFCN)Andrew GilmartinBrown University(NewFileName XFCN)Will CateGaithersburg, MDCompuServe: 71360,3122, GEnie: W.CATE(ShutDown XCMD)Bill & Steve TuttleCompuServe: 72356,253, GEnie: B.Tuttle(Color XCMD)Thanks also to Stephen Howard and Dan Wood, of BMUG, Inc., for explaining in non-technical terms how pop-up menus work, and providing interface suggestions, respectively. Thanks to Richard Digre for providing the first user feedback on version 1.x of the PHONE BOOK stack. Finally, Mark, we will always remember your generous spirit, kind soul, and powerful high-fives.I owe much gratitude to the various Mac magazines, like dear old departed MACazine, and the continuing MacUser for tips, tricks, and their HyperCard Toolbox!Finally, thanks to those whose efforts somehow may have inadvertently and without credit evolved into this stack, especially those on the BMUG BBS (and MacHYPE).VERSION HISTORY1.9 & Earlier—Boy, was I green! Let’s not talke about it…2.0—Reworked the pop-up menus, adding hierarchical pop-ups. Certain input fields obtained diplomas—they learned how to insert dashes and slashes automatically. Support for small screens was enhanced by showing the menu bar when the cursor is in the area occupied by the menu bar.2.01 to 2.0.3—Added missing area codes (sorry!) and tweaked the export process. Added a pop-up menu to find by letter on the last name field. Added the capability of opening any application with the Option key + Word button combination.2.1—Reworked both the sorting scripts and the export mechanism. You can now sort by date, as well as text, in either ascending or descending order, all without holding down the option key. Custom exports no longer delete fields!!! (Finally, no more warnings of doom and gloom!)2.2—Fixed the restricted Find (option + Find) so that it now works as advertised. Converted the Export button into a pop-up selection and fixed the Microsoft Word Mailing Label templates so that they work!2.3—Added the A-Z tabs to go directly to that place in the stack.2.4—Completely revised the pop-up menus, making them easily configurable (in the process, lost 10K!). Also fixed a bug so that pop-up menus are now placed correctly on large screens.2.4.1—Added exports by range of cards and enlarged the size of the Notes field.2.4.2—The Export process now exports only those cards that contain relevant data. Added Christmas Card reports.2.5—Added expanding and shrinking Notes field. Added Lists to the Export button. Added Configuration Card for customizing menus and buttons.2.6—Simplified the method by which finds by the Last Initial are implemented. Combined and modified the Import/Export buttons into a pop-up menu. Made the Configuration Card directly accessible with a pop-up menu (combined with Help). Changed the “Position” field to a more clear “Job Title” field. Added ability to find Area Codes. Modified all pop-up menus to appear from the side, instead of on top of the buttons. Changed the field order so that the “AddressBlock” and “CardNumber” fields follow the “Notes” field. Finally, extensively modified this Help stack that you are reading!!!2.7—Added pop-up menu selections for the automatic importation of Apple’s Address stack and Focal Point II’s Directory stack. Version 2.7.1 fixes a bug on importing other stacks’ cards that contain only one line (sorry!).2.8—Added European Address Block styles, revised Phone Book Help to make it easier to use, fixed the Configuration Card dialog boxes that asked you the wrong thing (ugh), revised various scripts to make them more robust, added an import feature for old versions of the Phone Book, added a few pop-up items, and added additional Word 4.00D templates. Hope you like ’em!2.9.1—Interim fix for HyperCard version 2.0! The change in the ordering of messages really messed up a few scripts—they are cleaned up. Added the Registration Card to make it easier to register this stack. Added support for marked cards and importation of Apple’s new Addresses stack. Tweeked certain scripts (I guess I’m learning something).2.9.2—Reinstituted the way that repetitive Finds work: now you press the return key instead of the mouse button (which wasn’t intuitive). Moved the “Mark” button so that small-screen Macs can use it (sorry!!!), and allowed for marking and unmarking all cards. Moved the Birthday, Anniversary, and Card fields, but their functions did not changed. Trapped the Phone Log and Mail Log buttons (under development).2.9.3—I updated a few scripts to streamline them or make them easier to use (like the Installer button) and fixed a bug in the HomeZip field. I also added a built-in reports that should produce labels for both an ImageWriter and a LaserWriter. HC 2 doesn’t allow precise space settings, so these may be a little touchy.FUTURE VERSIONS:I’m real close to a better implementation of modifying the pop-up menus—both additions and deletions. I also tried different background patterns, even Apple’s provided “marble” pattern. I found that with this stack, it only made the appearance busy—so, you’re stuck with plain old gray, unless you change it yourself. This version does not yet implement all the new “goodies” in HyperCard 2, but hey, I’ve been busy. I WILL get to version 3.0 of the Phone Book Stack. If you register now, you’ll be registered for version 3.0!Possible enhancements include the development of mail merge templates for an ImageWriter printer. Let me know what you want, and I’ll see what I can do!A few registered users want this stack to expand to so that they may trash their old versions of Focal Point II. If I receive enough encouragement, both in the way of words and $$$, I will consider adding modules.The next version will support more features in HyperCard 2.0! I am not at all happy with HyperCard 2.0’s new Phone Dialer, so I will probably put much of Apple’s full-featured “Phone” stack into the Phoen Book. (Can anyone figure out how to make the Phone Dialer recognize your local area code???) Tell me what you like: do you want icons on a palette?</text>
</content>
<content>
<layer>card</layer>
<id>96</id>
<text>IMPORT/EXPORT Pop-up MenuIMPORT PROCESS:You may import existing data into the Phone Book stack from one of five sources: 1) a text file, 2) Apple’s old Address stack (given away as part of the 1.2 release), 3) Apple’s new Addresses stack (given away as part of the 2.0 release), 4) Focal Point II’s Directory stack (FP2•Directory), and 5) old versions of the Phone Book stack.The Import process will automatically add data to your Phone Book stack, appending new cards to the stack for each record imported. The key to successful operation is preparing your data for import.TEXT FILES:For text files, the standard, tab-delimited, mail-merge format is supported. Specifically, each field must be separated by a tab; each record (card) by a carriage return; and all field entries containing either commas or quotation marks must be fully enclosed in an additional set of quotation marks. Note that any field’s entry that begins with a smart (curly) quote (“) will cause havoc to the field’s separation, even if it is enclosed with an ending smart quote (”). It’s OK to use smart quotes within a field (even ending a field), just don’t begin a field’s entry with one. It’s perfectly fine to use straight quotes ("") in the standard mail-merge manner.The text file must also be structured so that it has entries for EVERY field in the Phone Book stack; further, those entries must be in the same order as those appearing in the Phone Book stack; and finally, the first record of the text file must be a header containing the names of each field in the Phone Book stack.Note that you need not have data for each field in each record (except in the header, in which case it is simply the field name), but each field must exist (at least as separated by a tab). In fact, the AddressBlock field should contain nothing (except in the header), since the Phone Book stack will build that field automatically for you later. The header should have 31 fields in the following order:Salutation <tab> FirstName <tab> MiddleName <tab> LastName <tab> Ext <tab> JobTitle <tab> Company <tab> WorkAddress1 <tab> WorkAddress2 <tab> WorkCity <tab> WorkState <tab> WorkCountry <tab> WorkZip <tab> WorkPhone1 <tab> WorkPhone2 <tab> HomeAddress1 <tab> HomeAddress2 <tab> HomeCity <tab> HomeState <tab> HomeCountry <tab> HomeZip <tab> HomePhone1 <tab> HomePhone2 <tab> Birthday <tab> Anniversary <tab> Family <tab> BdayCard <tab> XmasCard <tab> Notes <tab> AddressBlock <tab> CardNumber <return>.Once you select the Text import pop-up menu, you will be asked to confirm that you want to import a file. Click “Cancel” to exit gracefully. Click “OK” (or hit Enter or Return) to go on. You will then be asked to select a text file. The dialog box will show only text files. Once you select the text file, the importing should proceed on its own, informing you of the progress along the way and beeping at you when it’s done.If your text file’s number of fields does not match the Phone Book stack, you will be so informed. In this case, add or delete the appropriate fields to your text file and try again. Note that the order of the last three fields was changed in version 2.6 of the Phone Book stack.ADDRESS, ADDRESSES, FOCAL POINT & OLD PHONE BOOK IMPORTS:For the other four pop-up menu selections, Address, Addresses, Focal Point II, and Ph Book-Old, you must have the selected stack mounted and available to HyperCard. With the exception of Ph Book-Old, the Phone Book stack will find the respective stack, copy data out of it, and paste the data into your new Phone Book stack. The data from your original stack will not be altered.For Ph Book-Old, you will be asked to locate and open the older version of the Phone Book. The older version of the Phone Book stack will be renamed to “Phone Book-Old” and the Phone Book stack will then import all the records automatically. (Note that your old Phone Book must either be named something other than Phone Book, or exist at a different level in your disk’s directory—either in a folder or on another mounted volume.)Importing from the Address, Addresses, and Focal Point stacks involves more guesswork than importing from an old version of the Phone Book—the Address and Focal Point stacks are free-form while entry into the Addresses stack is somewhat structured and the Phone Book stack is fully structured. The Phone Book stack will make best guesses as to which data elements go where—you will need to correct any mistaken guesses by cutting and pasting data.The Phone Book stack always assumes that the first line contains a person’s name. If the name has two words, it puts the first word into the First Name field and the second word into the Last Name field. If there is a third word, it puts the middle word into the Middle Name field. If there are four or more words, it puts one word each into the Salutation, First Name, Middle Name, Last Name, and Extension fields, in that order. The Phone Book stack will put any words beyond the fifth word into the Notes field—you must cut and paste the name to put it in proper order.The Phone Book stack also assumes that the last line of a record contains the City, State, and Zip Code. It first puts the last word (including nine-digit zip codes separated by dashes) in the Work Zip Code field, the penultimate word in the Work State field, and all other words on the last line in the Work City field. As you can see, if you don’t have these three data elements, you will need to perform a lot of cutting and pasting.The Phone Book stack will then back-fill all lines of data into the previous fields, starting with the Work Address 2 field. Once it reaches the Job Title field, it will then put any remaining text into the Home Address 1 & 2 fields. Again, the more complex the original address, the more cutting and pasting that must be performed.Next, the Phone Book stack will put all phone numbers (up to six) into each of the four Phone fields, with any overflow going into the Notes field. Finally, the Date field (in the case of Apple’s Address stack) and the Notes field (in the case of Focal Point II) will be appended to the Notes field.Before you begin this import process, make sure that you have sufficient disk space, and be prepared to wait 1-2 seconds for each card imported. You will be informed of the Phone Book stack’s progress, and you will be notified with a beep when the import process is complete. Then, you may begin cutting and pasting!!!EXPORT ProcessThe Export button gives you a pop-up menu allowing you to export your field data to create Lists (Names Only, Birthday Lists, or Anniversary Lists), Mailing Labels (Work Addresses, Home Addresses, or Christmas Cards), an Address Book, or a Custom Report. The Export button creates tab-delimited TEXT files, which you may then use for mail-merge or other data base operations. Note that for Custom Reports, all field entries containing commas or quotes are fully contained in an additional set of quotes, for those data bases that so require.This Export button utilizes the value of having each entry in a separate field. For example, have you ever wanted to produce a sophisticated mail-merge operation where the letter is fully, formally addressed, but the salutation is stripped out of the letter’s body text? You can accomplish all that and more by using the Export feature. (Of course, your word processor or data base must support these mail-merge features!)HOW EXPORT WORKS:Initially, you will be asked if you want to export all cards in the stack, only the marked cards, or a selected range (the default is all cards). If you click on the “Range” button, you will be asked to specify the first card (by number) and the last card (by number) that you want in your export range. So, prior to making a selected range, make sure to note the first and last card number you wish to export!You will then be asked if you wish to strip out superfluous tabs and returns that may have inadvertently been appended to the ends of your text fields—a rare occurrence, since all but the Family and Notes fields are set to automatically go to the next field whenever you hit a tab or return key. You would have to click in just the right spot to create a return at the end of an auto-tabbing field. However, an extra tab or return could really wreak havoc on a mail-merge, so as an extra precaution, you might have the extra tabs and returns stripped out. Beware that this process takes time, however.If you had chosen to make one of the pre-formatted reports for use in conjunction with the Microsoft Word 4.0 templates, the Phone Book stack will do the rest until you have to name the export file.If you had chosen to make a Custom Report (e.g., to import into a database), you will be asked if you want to exclude any fields prior to the export. This feature is quite useful in that for many mail-merge operations you would not want the Notes, AddressBlock, Card Number, and Phone fields, for example. (Yes, you could strip them out later or simply not use them, but this way is slicker and it greatly speeds up the export operation!) Be particularly cautious about including the AddressBlock field, where each line is separated by a carriage return (important for mail-merge). When used in conjunction with ascending and descending sorts, as well as selected ranges, excluding fields enables you to zero-in on your data.If you answer “Yes” to the dialog box asking you to exclude fields, the cursor will change to a bomb! Don’t worry, be happy and click on the field you want to exclude (it will just hide them temporarily). Note that the CardNumber field does not highlight, yet may be excluded by “bombing” it. It’s that simple! This procedure will repeat until you click on “No.”For all types of exports, you will eventually be asked to save the TEXT file. You may either accept the appropriate default name (you must use the default when using the included Word 4.0 templates), or create your own (remember the name and where you saved it!). Note that if you click “Cancel” at this point, you may encounter a bug giving you error message -37. Simply select “Cancel,” and no harm will be done. (Does anyone have a bug fix???) Once you name the file, the card data will be exported, and you will be kept informed of its progress.Be patient! On a Mac IIcx, it takes 1-2 seconds to export a complete record. Of course, the more fields you exclude and the fewer the cards, the faster the process. To speed up the process, the “Work Labels” option will export only those fields that have an entry in the WorkAddress1 field. Similarly, “HomeLabels” restricts exports to cards with entries in the HomeAddress1 field, and the “Christmas Card” labels use the XMas checkbox to determine which cards to export. The Mac will beep at you when it’s done, telling you how many records it has successfully exported.EXPORTING HINTSIf any of the fields you export contains carriage returns, the carriage returns will be interpreted as the beginning of a new record. For that reason, be particularly careful NOT to put carriage returns between real text in the Family and Notes fields (if you ever intend to export those fields). Also, don’t forget to exclude the AddressBlock field when performing a manual export, since each line in that field is separated by a carriage return (unless that is the only field you are exporting).Also note that if you create a Custom Report, your text file will have quotation marks ("") surrounding those fields that otherwise contain quotation marks ("") and commas (,). If you intend to use Microsoft Word 4.0’s Table feature, try to use smart quotes (“”) in your field entries so that you can eliminate all the unneeded straight quotes ("") in a single Change command (get Quote Init 2.2 by Lincoln Stein—it’s great!).</text>
<text>Click on this button to alternately “Mark” and “Unmark” your cards. Hold the Option Key down to “Mark” and “Unmark” all the cards in your stack.You may print, find, and sort all of your marked cards later. Use this feature to develop subsets of your cards.</text>
</content>
<name>Phone Book Help!</name>
<script>on openCardhide msgplay "Help!"show cd fld "Welcome"show btn "Register Now"show btn "Forget it, Buster!"set cursor to handwait until the mouseClickrepeatif (the mouseLoc is within the rect of btn "Register Now") or (the mouseLoc is within the rect of btn "Forget it, Buster!") thenclick at the mouseLocexit repeatelse wait until the mouseClickend repeatend openCardon mouseUpanswer "Don’t click on a button, just point!" with "I know" or "I’m sorry" or "I’m stupid"if it is "I know" thenplay flute tempo 130 f3Q g a#e a# c4Q a#3s a# a# a# c4q cHend ifif it is "I’m sorry" thenplay flute tempo 240 c#4e d# f f# g# g g# f f# g# a# b c#5 c c5# bb4e be d5t d#e g#4 bb4t be f gt g#e c# et fe f# at a#e c# et f#e a3# c4t c#e f#3wend ifif it is "I’m stupid" thenplay harpsichord "ee c"end ifend mouseUpon showMeset hilite of target to trueput the short name of target into showItput showIt&"Txt" into gotchashow cd fld gotchaend showMeon restoreItput the short name of target into restoreMeput restoreMe&"Txt" into gotchahide cd fld gotchaset hilite of target to falseend restoreIt</script>
 (January 1993).iso/Files/Hyper/P/Phone Book Stack.cpt/Phone Book Stack/Phone Book Help/BMAP_5219.png){kind=link}
 (January 1993).iso/Files/Hyper/P/Phone Book Stack.cpt/Phone Book Stack/Phone Book Help/PATs.png){kind=link}